Gas warning systems protect lives and health by monitoring the atmosphere inside any enclosed space and triggering an optical and acoustic alarm, as soon as the concentration of the gas that is being monitored exceeds the preset threshold level.

AMS gas warning systems are based on semiconductor sensors that have proved themselves over the years.

AMS gas warning systems:
Typ P,      for monitoring liquid gas (Propane/Butane) and natural gas (Methane)
Typ C,      for monitoring carbon monoxide (CO) and smoke (fire)

Series camp signal and camp signal S/2

Clamp Signal		Clamp Signal S/2
ø 55 mm, Height 30 mm		ø 58 mm, Height 40 mm

The series camp signal model is a self-sufficient warning system that incorporates the sensor and the acoustic signalling unit in addition to the semiconductor based electronics.
It is designed to work with a 12 DC current supply.

The series camp signal S/2 model is equipped with an additional switching relay (1 A, 2-way electronic switch) which can trigger any connected device in case of an alarm, e.g. disabling any gas supply by triggering a magnetic valve or turning on an external siren or flashlight.

Areas of use: Caravans, motor homes, boats, holiday home Series AMS - GASALARM

H/W/D 100x50x40 mm		A compact reliable device for your safety GS-approved for gas and electric operation Equipped with Green LED power-on indicator Red LED warning light Electronic siren 85 dB (A) / 3 m The device operates with an AC current 230 V 50 Hz supply with standard European plug on the rear cover. Just plug in! Warning: Installation height must correspond to gas monitored!
Optional models: - equipped with 1.5 m power cable and standard European plug - operates with 12 Volt DC current supply and equipped with 2.0 m cable Areas of use: All living areas, small businesses and  holiday homes, motor homes, caravans

Series AMS - GASALARM S/2

H/W/D 125x140x42 mm		The GASALARM S/2 is a well equipped easy-to-use gas warning system especially appealing to the user who wants to incorporate safety and attractive design into his home. - GS-approved for gas and electric operation - Equipped with Green LED power-on indicator Red LED warning light Electronic siren 85 dB (A) / 3 m Relay output (load-free double-throw contact) 5 A / 230 V AC 12 V DC output , switched on by alarm The device operates with an AC current 230 V 50 Hz supply with standard European plug.
Optional model : - operates with 12 Volt DC current supply Model variation : GASALARM S/2 FS with remote sensor unit See GASALARM S/2, but equipped with a remote sensor instead of the built-in sensor unit. Distance between control unit and remote unit about 20 m, e.g. installation of the control unit inside the living area, installation of the remote sensor in the boiler room next to the safety hazard. Areas of use: Businesses (except Ex-Hazard areas), all living areas

Additional information: Click Here

ENQUIRE NOW QUICKLY AND EASILY!

Hot Line: 01707 270404 Email: Click Here